Table of Contents
Advertisement
Installation
4.9
Angle sensor / Inclinometer
4.9.1
Tail lift without autotilt
1. Install the angle sensor on the platform using the nuts, bolts and washers supplied and attach the cable
using cable ties; see. Figure 55.
2. Connection is described later in section
4.9.2
Tail lift with inclinometer for autotilt
1. Install the inclinometer on the platform using the nuts, bolts and washers supplied and attach the cable
using cable ties; see. Figure 56.
2. Connection is described later in section
32
6.
x4
Figure 55. Installing the angle sensor
6.
Figure 56. Installing inclinometers
Z 1500/2000-135/155/175
x4
www.zepro.com
Advertisement
Table of Contents
