Table of Contents
Advertisement
Installation
4.6.1
Fixed underrun protection
1. Install the brackets on the tail lift frame using 3
x M12x100 bolts each, without tightening them.
See Figure 51.
2. Install the centre sheet-metal profile using 4 x
M12x110 bolts on the brackets. See Figure 52.
Tightening torque 55 Nm.
3. Tighten the bolts used to install the inner brack-
ets in step 1.
Tightening torque 55 Nm.
4. Install the outer sheet-metal profiles using 2 x
M12x110 bolts each. See Figure 53.
Tightening torque 55 Nm.
30
Z 1500/2000-135/155/175
Figure 51. Installing brackets on the frame
Figure 52. Installing the inner sheet-metal profile
Figure 53. Installing the outer sheet-metal profile
www.zepro.com
Advertisement
Table of Contents
