Table of Contents
Advertisement
Important information
1.3
Identification
Z
= Standard model
Max. lifting capacity x 1 (kg)
Max. lifting height
Cylinder model,
1.4
CE marking
ZEPRO tail lifts for sale on the European market are CE marked (Conformité Européenne). The manufacturer
guarantees that the product complies with the EU Machinery Directive.
Follow the installation instructions carefully. Modifications not approved in writing by the manufacturer are
not permitted. Welding is not permitted.
1.5
Product approval
Properly assembled, this product meets relevant requirements according to EN 1756-1:2001 + A1:2008.
1.6
Hydraulic oil
If the hydraulic oil needs to be replenished, only the oil recommended by ZEPRO is permitted to be used.
Hydraulic systems with hydraulic oil tanks without labelling are only permitted to be filled with highly refined
mineral oil (art. no. 21963, 1 litre).
Hydraulic systems with hydraulic oil tanks marked with a specification for the hydraulic oil are only permitted
to be filled with the oil specified on the label.
1.7
Guarantee
The ZEPRO warranty applies only if assembly has been carried out according to ZEPRO's assembly instruc-
tions by a ZEPRO approved bodybuilder.
After installation, testing and verification, register the tail lift's delivery card to validate the warranty.
6
-135 = 1340 mm
-155 = 1530 mm
-175 = 1710 mm
MA =
Double-acting adjustable tilt
Single acting Single speed Lift
DA =
Double-acting adjustable tilt
Double acting Single speed Lift
Z 1500/2000-135/155/175
T.ex
Z
1500 - 135 MA
_ _
_ _ _ _ - _ _ _ _ _
www.zepro.com
Advertisement
Table of Contents
