Angle Sensor / Inclinometer - Zepro Z 1500-135 Installation Instructions Manual

Installation
4.5

Angle sensor / Inclinometer

4.5.1 Tail lift without autotilt
1. Install the angle sensor on the platform using the nuts, bolts and washers supplied and attach the cable
using cable time; see. Figure 45.
2. Connection is described later in section
4.5.2 Tail lift with inclinometer for autotilt
1. Install the inclinometer on the platform using the nuts, bolts and washers supplied and attach the cable
using cable time; see. Figure 46.
2. Connection is described later in section
28
6.
x4
Figure 45. Installing the angle sensor
6.
Figure 46. Installing inclinometers
Z/ZL 1500/2000-135/155/175
x4
www.zepro.com