Lubrication And Oil Level Check; Lubrication; Oil Level Check - Zepro Z 1500 Installation Instructions Manual

Lubrication and oil level check

9 Lubrication and oil level check
The following lubrication points must be greased on installation. They must then be lubricated at least 4
times a year.
9.1

Lubrication

NOTE!
Use LE lubricant 4622 or the equivalent.
1. Right tilting cylinder, at lower bearing.
2. Right lift cylinder, at lower bearing.
3. 1st boom right side, at lower bearing.
4. Left lift cylinder, at lower bearing.
5. Left tilting cylinder, at lower bearing.
6. Lift arm left side, at lower bearing.
7. Left tilting cylinder, at upper bearing.
8. Right tilting cylinder, at upper bearing.
9. Lift arm right side, at upper bearing
10. Right lift cylinder, at upper bearing.
11. Left lift cylinder, at upper bearing.
12. Lift arm left side, at upper bearing.
9.2

Oil level check

Check the fluid level in the tank during maintenance, top up if necessary. The marking on the hydraulic tank
indicates the type of hydraulic fluid used. Mineral hydraulic fluid, product no. 21963 (1 litre), or biodegradable
synthetic fluid, product no. 22235 (1 litre).
7
12
58
11
4
5
Figure 83. Lubrication points
6
9
10
Z 1500/2000-135/155/175
8
3
1
2
www.zepro.com