Installation
4.11
Angle sensor / Inclinometer
4.11.1
Tail lift without autotilt
1. Install the angle sensor on the platform using the nuts, bolts and washers supplied and attach the cable
using cable time; see. Image 57.
2. Connection is described later in section
4.11.2
Tail lift with inclinometer for autotilt
1. Install the inclinometer on the platform using the nuts, bolts and washers supplied and attach the cable
using cable time; see. Image 58.
2. Connection is described later in section
www.zepro.com
6.
x4
Image 57. Installing the angle sensor
6.
Image 58. Installing inclinometers
x4
ZN 2500-130/150
35