Table 1-2 System Defaults; System Defaults - SMC Networks TIGERSWITCH SMC6752AL2 Management Manual

System Defaults

The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file
should be set as the startup configuration file (page 3-23).
The following table lists some of the basic system defaults.
Function
Console Port
Connection
Authentication

Table 1-2 System Defaults

Parameter
Baud Rate
Data bits
Stop bits
Parity
Local Console Timeout
Privileged Exec Level
Normal Exec Level
Enable Privileged Exec
from Normal Exec Level
RADIUS Authentication
TACACS Authentication
802.1X Port
Authentication
HTTPS
SSH
Port Security
IP Filtering
S
YSTEM
Default
9600
8
1
none
0 (disabled)
Username "admin"
Password "admin"
Username "guest"
Password "guest"
Password "super"
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled
Disabled
D
EFAULTS
1-7