Maintenance And Servicing; Who Is Allowed To Perform Servicing And Maintenance Work; What Is A Technical Safety Check; How Often Does A Technical Safety Check Have To Be Performed - Erbe VIO 300 S Service Manual

CHAPTER 6

Maintenance and servicing

ATTENTION!
IMPORTANT!
IMPORTANT!
Who is allowed to perform servicing and maintenance
work?
Adjustments, tests, modifications, maintenance and repair work may
only be performed by Erbe or persons trained by Erbe. If the work is not
performed by trained persons, Erbe accepts no liability and warranty
rights become void.
It is recommended that the technical safety check also be performed by
Erbe or persons trained by Erbe.

What is a technical safety check?

The technical safety check is a preventive measure to examine whether
the device is safe and ready for operation. In order to perform the vari-
ous tests the current specifications and regulations of the particular
country and the instructions in this service manual must be observed.
How often does a technical safety check have to be
performed?
Erbe recommends performing a technical safety check after every
repair, but at least once a year.
6 • Maintenance and servicing
39
/ 64