Erbe VIO 300 S Service Manual page 27

Recognizing module: B = Control panel
Recog- Error
nizing code
module
B 84
B 85
B 87
B 8B
B 8D
B 8E + 8F
B 90
B 91
B 95
B 9F
Additional infor- Description
mation
Footswitch was recognized
by the system: 
Occurs if a footswitch is con-
nected.
Footswitch was discon-
nected from the system:
Occurs if a footswitch is dis-
connected from the system.
No status message from APC
module: 
Occurs if an APC module is
disconnected from the sys-
tem.
No status message from
IES module: 
Occurs if the IES module is
disconnected from the sys-
tem.
New instrument recognized
by system: 
Occurs if an instrument with
instrument recognition is
connected.
Instrument has been discon-
nected from the system: 
Occurs if an instrument with
instrument recognition is
disconnected from the sys-
tem.
5 • Remedying malfunctions
Action
Information, no fault condi-
tion.
Information, no fault condi-
tion.
Restart the unit. If the error
occurs again, notify Erbe Ser-
vice.
Restart the unit. If the error
occurs again, notify Erbe Ser-
vice.
Check connectors. Check
APC.
Restart the unit. If the error
occurs again, notify Erbe Ser-
vice.
Restart the unit. If the error
occurs again, notify Erbe Ser-
vice.
Check connectors. Check
IES 2.
Information, no fault condi-
tion.
Information, no fault condi-
tion.
27
/ 64