Site Requirements; Power Considerations; Power Cord - Thermo Scientific VC-D60 Operating Manual

5.3

Site Requirements

5.3.1

Power Considerations

5.3.2

Power Cord

Refractive Index Detector (VC-D60)
Operating Manual
The operating environment is important to ensure optimal performance
of the device.
This section provides important requirements for the installation site.
Note the following:
• Operate the device only under appropriate laboratory conditions.
• The device is intended to be part of the Vanquish system. Observe
the site requirements for the Vanquish system as stated in the
Vanquish System Operating Manual.
• For specifications, see
Specifications sections in the Operating Manuals for the other
modules in the Vanquish system.
• For general residual hazards, see
(} page 22).
The power supply of the device has wide-ranging capability, accepting
any line voltage in the range specified for the device.
CAUTION—Electric Shock or Damage to the Device
Connecting the device to a line voltage higher or lower than specified
could result in personal injury or damage to the device.
Connect the device to the specified line voltage only.
The power cords are designed to match the wall socket requirements of
the country in which they are used. The end of the power cords that
plugs into the power socket on the device is identical for all power cords.
The end of the power cords that plugs into the wall socket is different.
Specifications (} page 115)
General Residual Hazards
5 • Installation
and the
Page 47