Starting And Stopping The Centrifuge; Starting The Centrifuge; The "Stop" Key - Hermle Z 446 K User Manual

OPERATION

2.6 Starting and Stopping the Centrifuge

2.6.1 Starting the Centrifuge

Start the centrifuge with either the "start" key (9), or the "quick" key (8).
With the "start" key (9), stored runs or runs with manually pre-selected parameters can be started.
When the respective pre-selected running time has ended, the centrifuge will stop automatically.
With the "quick" key (8), start runs, which will last a few seconds, can be initiated.
By pressing the "quick" key (8), the centrifuge accelerates up to the pre-selected revolution.
In the display "time" (A-3), the passed running time is indicated from the moment the "quick" key (8)
is pressed.
By releasing the "quick" key (8), the centrifuge stops and the running time is indicated, until the lid is
opened.
For all number marked text, please refer to Figure 28.
Figure 28

2.6.2 The "STOP" Key

With the "stop" key (10), the run time can be interrupted, at any time, (see Figure 29). After pressing
the key, the centrifuge decelerates with the respective pre-selected intensity, down to a standstill.
Figure 29
28
Z446K_V1.22_eng © Hermle Labortechnik GmbH