Table of Contents
Advertisement
TRANSPORT, STORAGE AND DISPOSAL
6. TRANSPORT, STORAGE AND DISPOSAL
6.1 Transport
Before transporting, take out the rotor.
Only transport the unit in its' original packaging.
Use a transport aid, for transporting over longer distances, to fix the motor shaft.
General Transportation
6.2 Storage
During storage of the centrifuge, the following environmental conditions must be observed:
Transport Packaging
6.3 Disposal
Information on the disposal of electrical and electronic equipment in the European
Community:
Within the European Community, disposal for electrically powered equipment is dictated by national
regulations based on the EU Directive 2012/19/EC on Waste Electrical and Electronic Equipment
(WEEE2).
According to this directive, all devices supplied after 13.08.2005 in the business-to-business sector,
in which this product is classified, may no longer be disposed of with municipal waste or household
waste. To document this, they are marked with the following label:
As this device is a device used exclusively for business purposes (B2B), it must not be handed into
public waste disposal companies.
The device can be disposed of by stating the date of purchase and the device number at:
Hermle Labortechnik GmbH, Siemensstraße 21, 78564 Wehingen,WEEE-Reg. No. DE 55649821
For all devices delivered before 13.08.2005, the last user is responsible for proper disposal.
RoHS Declaration of Conformity
HERMLE Labortechnik GmbH, Siemensstraße 25, 78564 Wehingen, Germany, hereby declares that
all components produced are in conformity with Directive 2015/863/EU of the European Parliament
and of the Council of 31.3.2015 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
© Hermle Labortechnik GmbH
Air
Rel. Humidity
Temperature
-25 to 60 °C
10 to 75 %
-13°F to 140°F
Air
Rel. Humidity
Temperature
-25 to 55 °C
10 to 75 %
-13°F to 131°F
Z446K_V1.22_eng
Air Pressure
30 to 106 kPa
Air Pressure
70 to 106 kPa
37
Advertisement
Table of Contents
