Pre-Selection Of Brake Intensity And Acceleration - Hermle Z 446 K User Manual

OPERATION

2.3.3 Pre-Selection of Brake Intensity and Acceleration

Selecting the key, "accel/decel" (5), this function is activated.
By pressing the key once, the word "accel" (M7) flashes, in the display "accel/decel" (A-2). The
desired acceleration can be pre-selected, with the adjustable knob (1). The value 0 is equivalent to
the lowest acceleration and the value 9 is equivalent to the highest acceleration.
By pressing the key "accel/decel" (5) twice, in the display "accel/decel" (A-2), indicates the word
"decel" (M8). Now the desired brake intensity can be pre-selected, with the adjustable knob (1). The
value 9 is equivalent to the shortest possible brake time and the value 0 to longest possible brake
time.
For all number marked text, please refer to Figure 20.
See Table 5: "Acceleration and Deceleration Times", (APPENDIX P. VII). This table shows the
acceleration and deceleration times, for the acceleration and deceleration stages 0 to 9, for
permissible rotors.
Figure 20
23
© Hermle Labortechnik GmbH Z446K_V1.22_eng