1.6.5 Following Rules Must Strictly be Adhered To:
•
Do not operate the centrifuge if not installed correctly.
•
Do not operate the centrifuge when dismounted (e.g. without housing).
•
Do not run the centrifuge, if mechanical or electrical assembly groups have been tampered
with, by unauthorized personnel.
•
Do not use accessories such as rotors and buckets, that are not approved by HERMLE
Labortechnik GmbH, except commercially available centrifuge tubes, made of glass or
plastic.
•
Do not spin extremely corrosive substances, as they may cause material damages and impair
mechanical resistance.
•
Do not operate the centrifuge with rotors or buckets, that show any signs of corrosion or
mechanical damage.
The manufacturer is responsible for safety and reliability, of the centrifuge, only if:
•
The unit is operated in accordance to this instruction manual.
•
Modifications, repairs or other adjustments are performed by HERMLE-authorized personnel
and the electrical installation of the related location corresponds to the IEC-regulations.
1.6.6 Warranty
The centrifuge has been subjected to thorough testing and quality control. In the unlikely case of any
manufacturing faults occurring, the centrifuge and rotors are covered by warranty, for a period of two
years, from date of delivery. This warranty becomes invalid in any case of mishandling, damage
and/or negligence and further in any case of usage of inappropriate spare parts and / or accessories
or unauthorized modification of the unit.
Technical modification rights are reserved, by the manufacturer, in regards to technical
improvement!
© Hermle Labortechnik GmbH
Z446K_V1.22_eng
PRODUCT DESCRIPTION
9