Appendix 2 Specification change
Appendix 2-1 SERIAL number check
Check the SERIAL number indicated on the inverter rating plate or package. (Refer to page 2)
Rating plate example
Symbol Year Month Control number
SERIAL (Serial No.)
The SERIAL consists of one symbol, two characters indicating
production year and month, and six characters indicating control
number.
Last digit of the production year is indicated as the Year, and the
Month is indicated by 1 to 9, X (October), Y (November), and Z
(December).
Appendix 2-2 Changed functions
(1)
Operating conditions for the SAFE signal and SAFE2 signal
This change applies to the inverters having the following SERIAL or later. (Refer to page 24.)
Type
FR-E720-0.1KNC to 15KNC
FR-E740-0.4KNC to 15KNC
FR-E720S-0.1KNC to 2.2KNC
•
The operating conditions (E.6, E.7, and E.CPU) are added for the SAFE signal and SAFE2 signal, which are used in the
safety stop function.
SERIAL (Serial No.)
D0
A0
A0
275