Mitsubishi Electric FR-E720-0.1KNC Instruction Manual page 102

Parameter list
Func-
Parameter Name
tion
Pr.CL Parameter clear
ALLC All parameter clear
Er.CL Faults history clear
Pr.CH Initial value change list
 Differ according to capacities.
6%: 0.75K or lower
4%: 1.5K to 3.7K
3%: 5.5K, 7.5K
2%: 11K, 15K

Differ according to capacities.
5s: 3.7K or lower
10s: 5.5K, 7.5K
15s: 11K, 15K

Differ according to capacities.
6%: 0.1K, 0.2K
4%: 0.4K to 7.5K
2%: 11K, 15K
 The initial value differs according to the voltage class. (200V class/400V class)

The range differs according to the Pr. 71 setting.

Available only for the three-phase power input model.
 These parameters are communication parameters that are not cleared when parameter clear (all clear) is executed from CC-Link communication. (Refer to
page 64 for parameter clear (all parameter clear) from CC-Link communication).
 If a password has been registered (Pr.297  "9999"), the parameter setting can be cleared (the password lock can be unlocked) only via CC-Link
communication.

Settings cannot be written during CC-Link communication (under Network operation mode).
98
Minimum Refer
Initial
Setting Range Setting to
Value
Increments Page
0, 1 1 0 227
0, 1 1 0 227
0, 1 1 0 229
— — — 228
Customer
Parameter
Setting
Read
Pr.CL
ALLC
Er.CL
Pr.CH
Instruction Code Control Mode-based Correspondence
Write Extended
V/F V/F V/F AD MFVC AD MFVC AD MFVC
— FC — — —
— FC — — —
— F4 — — —
— — — — —
Parameter list
Parameter
Clear All clear
GP MFVC GP MFVC GP MFVC
— — —
— — —
— — —
— — —
5