Belt Tension Adjustment For Efi Engines With P/N 105205401 Belt - Club Car Precedent 2016 Maintenance And Service Manual

19
Starter/Generator
DF
F1
1
3033
Figure 19-13 Starter/Generator Wiring

BELT TENSION ADJUSTMENT FOR EFI ENGINES WITH P/N 105205401 BELT

NOTE: This tension adjustment procedure is only for belts with part number 105205401. Locate and confirm part
number on belt before proceeding. For belt with part number 47539338001, see Belt Tension Adjustment
for EFI Engines with P/N 47539338001 Belt on page 19-15.
To prevent belt slipping while starting an EFI engine, follow procedure outlined below which is best performed
by two people to expedite the process, but can be performed by a single individual if required.
The amount a starter/generator belt is tensioned varies between a used and new belt.
EFI engines have higher starting torque demands that require consistent belt tension to prevent slipping. Belt tension
should be checked periodically.
Locate gauge midway between pulleys.
2724
Figure 19-14 Belt Tension Gauge
Page 19-12 2016 Precedent Golf Car Maintenance and Service Manual
2
4
3
F2
ELECTRICAL COMPONENTS – SUBARU EX40
2725
Figure 19-15 Belt Tensioning Tool Installation