Seat Bottom; Rear Body - Two-Passenger Vehicles; Universal Accessory Mounting - Club Car Precedent 2016 Maintenance And Service Manual

4
BODY AND TRIM

Seat Bottom

SEAT BOTTOM
The seat bottom (1) is secured to the vehicle with two hinges (2) (Figure 4-8, Page 4-11) that hook into slots in the
body. When replacing the hinges (2), tighten screws (3) to 75 in·lb (8.5 N·m). When replacing hip restraints (4), tighten
screws (5) to 65 in·lb (7.3 N·m).
1
2
5
3
2654
Figure 4-8 Seat Bottom, Hinge and Hip Restraint
REAR BODY – TWO-PASSENGER VEHICLES
See General Warnings on page 1-2.

UNIVERSAL ACCESSORY MOUNTING

NOTE: The Structural Accessory Module (SAM) uses clearance holes for accessories to attach to the canopy support
located inside the SAM.
The Structural Accessory Module (SAM) includes two mounting locations on both the driver side and the passenger
side (Figure 4-9, Page 4-12). These serve as common attachment points (1) for various accessories. Accessories that
can be mounted on the SAM include single or dual sand bottles, sand bucket, and the club cleaner.
2016 Precedent Golf Car Maintenance and Service Manual Page 4-11