Voltage Limiter; Voltage Limiter Removal; Voltage Limiter Installation - Club Car Carryall 550 2019 Maintenance And Service Manual

GASOLINE VEHICLE - ELECTRICAL
COMPONENTS

VOLTAGE LIMITER

VOLTAGE LIMITER REMOVAL

NOTE: Battery will charge reducing the voltage going to accessories.
The voltage limiter is located on the driver side cowl frame.
1. Disable the vehicle.
2. Disconnect the battery and spark plug wire.
3. Remove the cowl.
4. Disconnect the voltage limiter wires (1) (Figure 19-44, Page 19-37). Do not allow wires to touch.
3002B
Figure 19-44 Voltage Limiter
5. Remove the hardware (2).
6. Remove the voltage limiter.

VOLTAGE LIMITER INSTALLATION

1. Install the voltage limiter to the driver side cowl frame.
2. Install the hardware (2). Tighten the hardware to 25 in·lb (2.8 N·m) (Figure 19-44, Page 19-37).
3. Connect the voltage limiter green wire to the harness green wire.
4. Connect the voltage limiter black wire to the harness black wire.
5. Install the cowl.
6. Connect the battery and spark plug wire.
2019 Carryall 550 Maintenance and Service Manual
19
Voltage Limiter
Page 19-37