Accelerator Pedal Installation - Gasoline Vehicles - Club Car Carryall 550 2019 Maintenance And Service Manual

5
Accelerator Pedal – Gasoline Vehicles
13. Remove the accelerator pedal (1) from the vehicle.
14. Inspect all parts for wear and damage. Replace as necessary.
1
22
26
3000
ACCELERATOR PEDAL INSTALLATION – GASOLINE VEHICLES
1. If the accelerator pivot rod supports were replaced, position the supports (21) on the vehicle frame and install the
four bolts (22), flat washers (19), and lock nuts (18). Finger-tighten nuts at this time (Figure 5-6, Page 5-6).
2. Insert the lower end of the accelerator pedal (1) through the floorboard and install the accelerator pivot rod (6)
through the uppermost hole in the pedal.
Page 5-6 2019 Carryall 550 Maintenance and Service Manual
7
5
6
9
8
25
17
18
19
21
21
Figure 5-6 Accelerator Pedal – Gasoline Vehicles
ACCELERATOR AND BRAKE PEDAL GROUP
10
11
12
17
20
13
14
15
16
25
24