Club Car Carryall 550 2019 Maintenance And Service Manual page 535

Reassembly
Install Balance Shaft
Timing Mark Detail
B
A
Balance Shaft
A
Timing Mark
1. Position crankshaft so timing mark on larger
crankgear is in 8 o'clock position.
2. Install balance shaft (with wave spring), aligning
timing mark with timing mark on larger crankgear.
72
Balance Shaft Drive
B Gear on Crankshaft
Timing Mark
KohlerEngines.com
Install Valve Tappets and Camshaft
Timing Mark Detail
Camshaft Gear
A
Timing Mark
1. Lubricate face and stem of each tappet with engine
oil. Install each into their respective bores.
2. Lubricate camshaft bearing surfaces and cam lobes
as well as camshaft bore in crankcase with engine
oil.
3. Rotate crankshaft to TDC so timing mark (dimple) on
smaller crankgear is in 4 o'clock position. Install
camshaft into crankcase, aligning timing marks on
two gears.
4. Install original shims on crankshaft.
B
A
Camshaft Drive
B Gear on Crankshaft
Timing Mark
17 690 15 Rev. --