Editing Saved Data; Using Saved Data - Formax FD 3302 Operator's Manual

Chapter 3 Advanced Operation
The procedures taken after that will be the same as the steps 8 to 13 in Chapter 2 "3.
Standard Paper" (p.38).
The stacker roller position moves automatically according to the paper set.
Adjust the stacker roller position, if the paper flaps or misaligns at the time of ejection, or paper jam
occurs in the paper ejecting section.
"6-2. Adjusting stacker roller position" (p.62)
3-2.

Editing saved data

When the custom fold data that you want to edit is opened
1
Touch the
The [Paper Length] input screen is displayed.
2
Touch the
When you change the paper length, input the paper length with the numeric keypad, and touch the
key.
3
Touch [A:xxxx.x mm] or [B:xxxx.x mm] for the folding that you want to fine-adjust. —>
Input the value with the numeric keypad. —> Touch the
Return to the [Ready] screen.
4
Perform step 8 to 9 in "3-1. Operation" (p.53).
When the custom fold data that you want to edit is not opened
1
Touch the
The [Custom Fold] screen is displayed.
2
Select the number that you want to save. —> Touch the
The [Edit] screen is displayed.
3
Perform step 3 to 4 in "When the custom fold data that you want to edit is opened" (p.54).
3-3.

Using saved data

Example: When using saved data number [06]
1
Touch the
The [Custom Fold] saved data selection screen is displayed.
2
Touch the
The saved data number [06] is saved, and the display returns to the [Ready] screen.
54
key on the top screen.
key.
key—> Touch [Custom Fold].
key on the [Ready] screen —> Touch [Custom Fold].
key —> Touch [06] of custom fold data —> Touch the
Standard Folding of
key.
key.
key.