Benelli TNT 25 Maintenance Manual page 86

●Removal:
Remove the fixing screw [4]
Remove the air filter air inlet
Take the air cleaner element [5].
★Checking:
Check whether the filter element is polluted or damaged.
Please replace with a new one if it has been polluted or damaged.
★Cleaning:
Rinse the filter element softly and thoroughly with cleaner.
Then apply the oil to the filter element and then squeeze out the
redundant oil, so that the filter element is moist without oil dripping.
Remark
○Do not use the gasoline so as not to cause fires.
○Do not distort or warp the filter element so as not to damage the
foam materials.
●Install a new filter element [5].
Note
The recommended air filter element (Benelli part number:
49202N220002) must be used. If other air filter elements are
used, the engine will be worn prematurely or the performance of
engine will be reduced.
●Carry out the installation and disassembly in a reverse process.
●Tightening:
Tightening torque of air filter air inlet screw: 5 N·m
Tightening torque of tool box bolt: 8 N·m
Tightening torque of rear seat cushion screw: 8 N·m
●Install the removed parts back.
2-52