Notes before Maintenance
Please read the following precautions before checking, disassembling or assembling motorcycles. In order to facilitate
the actual operation, the chapters are provided with notes, illustrations, pictures, precautions and detailed descriptions. This
section describes the special precautions during the removal and reassembly or disassembly and reassembly of common
parts.
Pay special attention to the following matters:
Battery Installation
Before any operation is conducted for the motorcycle,
disconnect the battery wire and battery to prevent the engine
from starting accidentally. Disconnect the negative wire (-) and
then disconnect the positive wire (+). After the operation is
completed, connect the positive wire (+) to the positive terminal
(+) of the battery and then connect the negative wire (-) to the
negative terminal (-).
Sharp Edge of Part
To avoid that the hands are scratched by the sharp edges of
parts, gloves must be worn when the larger-size or heavier parts
are moved.
Solvent
The solvent with high flash point shall be used when parts
are cleaned. Use the solvent with high flash point according to
the instructions provided by the solvent manufacturer.
1-2