Benelli TNT 25 Maintenance Manual page 190

Installing Oil Pump
●The assembly of oil pump is shown below
Screw [A]
Chain [B]
Screw [C]
Gasket [D]
Roller sprocket [E]
Oil pump body [F]
Oil pump shaft [G]
Innerrotor[H]
Outer rotor[I]
Oil pump cover [J]
Note:
After the assembly, the inner and outer rotors shall rotate
flexibly without clamping stagnation.
●Install the parts disassembled previously and see the relevant chapters.
Tightening torque:
Fixing screw of roller sprocket: 10N·m
Fixing screw of oil pump cover: 10N·m
Fixing screw of oil pump: 10N·m
5-6