Coolant Pump; Disassembling Coolant Pump; Installing Coolant Pump - Benelli TNT 25 Maintenance Manual

coolant Pump

Disassembling coolant pump

●Remove the bottom cover (see "Disassembling Bottom Cover" in
the "Frame" chapter),
●Drain the coolant (see "Replacing Coolant" in the "Regular
Maintenance" chapter);
●Darin the oil (see "Replacing Oil" in the "Regular Maintenance"
chapter);
●Removing:
coolant Pump Cover Bolt [A]
ooolant Pump Cover [B]
coolant hose [C]
Note:
This operation shall be conducted when the engine is cooled.
Do not let the coolant splash to people when disconnect the
coolant hose
●Remove the impeller [A] from the coolant pump shaft.

Installing coolant Pump

●Install the parts disassembled previously (see the corresponding
chapters).
●Locking torque:
Locking torque of coolant pump cover bolt: 9.8 N·m
Locking torque of radiator coolant hose lock screw: 2.0 N·m
4-9