Table of Contents
Advertisement
●Press the passing lamp switch [D] (models with passing lamp
switches) or turn the dimmer switch to the position of high beam
[A].
●The low beam head lamp [A] and high beam head lamp [B] shall
be on.
●The high beam indicator (LED) [C] shall be on.
★If the high beam head lamp and/or high beam indicator (LED)
are/is not on, check or replace the following parts:
Head lamp high beam bulb (see "Replacing Head Lamp Bulb" in the
"Electrical System" chapter);
15A fuse of head lamp (high beam) (see "Checking Fuse" in the
"Electrical System" chapter);
10A fuse of head lamp relay (see "Checking Fuse" in the "Electrical
System" chapter);
Passing lamp switch button (models with passing lamp switch button)
(see "Checking Switch" in the "Electrical System" chapter);
Dimmer switch (see "Checking Switch" in the "Electrical System"
chapter);
Head lamp circuit relay in the relay box (see "Checking Relay
Circuit" in the "Electrical System" chapter);
Head lamp relay (high beam) (see "Checking Head Lamp Relay" in
the "Electrical System" chapter);
Wire harness (see "Checking Circuit" in the "Electrical System"
chapter).
●Turn off the engine stop switch.
●Low beam head lamp and high beam head lamp shall be still on.
★If the head lamp and high beam indicator (LED) are off, check or
replace the following parts:
Head lamp circuit relay in the relay box (see "Checking Relay
Circuit" in the "Electrical System" chapter).
●Turn off the main switch.
●The head lamp and high beam indicator (LED) shall be off
2-44
Advertisement
Table of Contents
Troubleshooting
