Table of Contents
Advertisement
Installing Front Shock Absorber
●Keep the direction and position of top of outer pipe [A] as shown
in the figure on the right before installing the front shock absorber.
1 mm [B]
●Locking torque:
Front shock absorber clamping bolt (at the lower side): 22 N·m
Front shock absorber head cover: 15-20 N·m
Front shock absorber clamping bolt (at the upper side): 22 N·m
Remark
○Lock the head cover before the front shock absorber clamping
bolt at the upper side is locked.
○Lock two clamping bolts twice alternately to ensure that the
locking torque is even.
●Install the parts disassembled previously (see the corresponding
chapters).
Replacing Front Shock Absorber Oil
●Remove the front shock absorber (see "Disassembling Front Shock
Absorber").
●Clamp the lower end of inner pipe with a vise.
●Remove the head cover [A] from the outer pipe.
6-60
Advertisement
Table of Contents
Troubleshooting
