Table of Contents
Advertisement
Checking Hub Bearing
Because the error of hub bearing is very small, generally it is unable
to measure the clearance.
○Do not remove any bearing for check, because the bearing must
be replaced with one after removal.
•If it needs to check whether there is an axial clearance in the
bearing, it is jammed or blocked during the rotation, please rotate
each bearing in the hub back and forth [A]!
★If the bearing cannot rotate smoothly, please replace the bearing!
•Inspect the bearing seal [B] for damage or leaks.
★If there is damage or leak in bearing seal, please replace the bearing!
Hub Bearing Lubrication
○Because there is lubricant in hub bearing and it is sealed, it does
not need to add lubricating oil to hub bearing.
Remark
Remark
6-22
Advertisement
Table of Contents
Troubleshooting
