Table of Contents
Advertisement
•Adjust static balance
a. Put balance weight "1" at the place opposite to the hard point "X"
at the rim.
Note
Start from the lightest weight.
Remark
○Benelli dealers sell the balance weights of 10, 20 and 30 g
respectively. The imbalance within 10g will not affect the driving
stability of the motorcycle.
○Please do not use more than 4 weights (including 4, total weight
of more than 90 g). If you need to control the balance with the
wheel of more than 4 weights, please disassemble the wheel to find
the cause of the problem.
b. Rotate the rim by 90°, and make the gravity point at the place
shown in the figure below.
c. If gravity point does not stop at one place, please use a heavier weight;
d. Repeat Steps [b] to [c] for several times, until rim is balanced;
•Checking static balance
a. Rotate rim, and confirm that it will stop at all places shown in the
figure.
b. If front wheel does not keep still at all positions, please balance it
again.
6-17
Advertisement
Table of Contents
Troubleshooting
