The Automatic Measurement Of Time Parameters - Promax OD-610 User Manual

Vpp: Peak-to-Peak Voltage.
Vmax: The maximum amplitude. The most positive peak voltage measured
over the entire waveform.
Vmin: The minimum amplitude. The most negative peak voltage measured
over the entire waveform.
Vamp: Voltage between Vtop and Vbase of a waveform.
Vtop: Voltage of the waveform's flat top, useful for square/pulse
waveforms.
Vbase: Voltage of the waveform's flat base, useful for square/pulse
waveforms.
Overshoot: Defined as (Max-Vtop)/Vamp, useful for square and pulse
waveforms.
Preshoot: Defined as (Min-Vbase)/Vamp, useful for square and pulse
waveforms.
Average: The arithmetic mean over the entire waveform.
Vrms: The true Root Mean Square voltage over the entire waveform.
3.5.6.2

The automatic measurement of time parameters

The oscilloscopes
Frequency, Period, Rise Time, Fall Time, +D Width, -D Width, Delay 12
Delay 12
June 2017
provide time
, +Duty and -Duty.
parameters
Figure 67.
auto-measurements include
,
69
Page