Promax OD-610 User Manual page 80

The menu is as follows:
Function
Menu
Autoscale
Mode
Wave
If you want to measure the two-channel signal, you can do as the follows:
Press Autoscale button, the function menu will appear.
Press H1 to choose ON.
Press H2 and choose
Press H3 and choose
June 2017
Figure 74. Autoscale menu.
Setting
ON Turn on Autoscale.
OFF Turn off Autoscale.
Follow-up and adjust both vertical and horizontal
settings.
Follow-up and only adjust horizontal scale.
Follow-up and only adjust vertical scale.
Show Multi-period waveforms.
Only show one or two periods.
Instruction
for Mode item.
for Wave item.
75
Page