How To Implement The General Inspection - Promax OD-610 User Manual

It indicates the measured type and value of the corresponding channel. "F"
means frequency, "T" means cycle, "V" means the average value, "Vp" the
peak-peak value, "Vk" the root-mean-square value, "Ma" the maximum
amplitude value, "Mi" the minimum amplitude value, "Vt" the Voltage value
of the waveform's flat top value, "Vb" the Voltage value of the waveform's
flat base, "Va" the amplitude value, "Os" the overshoot value, "Ps" the
Preshoot value, "RT" the rise time value, "FT" the fall time value, "PW" the
+D width value, "NW" the –D Width value, "+D" the +Duty value, "-D" the
-Duty value, "PD" the Delay AB
The readings indicate the corresponding Voltage Division and the Zero
Point positions of the channels.
The icon shows the coupling mode of the channel.
"—" indicates direct current coupling.

" " indicates AC coupling.
" " indicates GND coupling.
It is cursor measure window, showing the absolute values and the readings
of the two cursors.
The yellow pointer shows the grounding datum point (zero point position)
of the waveform of the CH2 channel. If the pointer is not displayed, it
shows that this channel is not opened.
The red pointer indicates the grounding datum point (zero point position)
of the waveform of the CH1 channel. If the pointer is not displayed, it
shows that the channel is not opened.
2.3

How to Implement the General Inspection

After you get a new oscilloscope, it is recommended that you should make a
check on the instrument according to the following steps:
Check whether there is any damage caused by transportation.
►
If it is found that the packaging carton or the foamed plastic protection
cushion has suffered serious damage, do not throw it away first till the
complete device and its accessories succeed in the electrical and mechanical
property tests.
Check the Accessories
►
The supplied
"SPECIFICATIONS" of this Manual. You can check whether there is any loss
of accessories with reference to this description. If it is found that there is
any accessory lost or damaged, please get in touch with the distributor of
PROMAX responsible for this service or the PROMAX local offices.
10
Page
accessories have
value and "ND" the Delay AB
been already
value.
described in the
June 2017