Promax OD-610 User Manual page 59

Function Menu
Object & Show
Save
Storage
When the type is Setting, the menu shows as following:
Setting
Save
Load
When the type is Image, the menu shows as following:
Save
54
Page
Setting
Object 1~15
ON
Show
OFF
Internal
External
Setting1
.....
Setting8
Description
Choose the address which the waveform
is saved to or recall from.
Recall or close the waveform stored in the
current object address. When the show is
ON, if the current object address has
been used, the stored waveform will be
shown, the address number and relevant
information will be displayed at the top
left of the screen; if the address is empty,
it will prompt "None is saved".
Save the waveform of the source to the
selected address. Whatever the Type of
save menu is set, you can save the
waveform by just pressing the Copy
panel button in
Storage format is BIN.
Save to internal storage or USB storage.
If choose the USB storage, the file name
is editable. The waveform file could be
open by waveform analysis software (on
the supplied CD).
The setting address.
Save the current oscilloscope setting to
the internal storage.
Recall the setting from the selected
address.
Save the current display screen. The file
can be only stored in a USB storage, so a
USB storage must be connected first. The
file name is editable. The file is stored in
BMP format.
any user interface.
June 2017