How To Set The Horizontal System - Promax OD-610 User Manual

When the vertical position of the channel waveform is adjusted, the
changed value is displayed at the left bottom corner of the screen (see
Figure 28).
3.3

How to Set the Horizontal System

The HORIZONTAL CONTROLS includes the HORIZ MENU button and such
knobs as HORIZONTAL POSITION and SEC/DIV.
HORIZONTAL POSITION knob: this knob is used to adjust the
horizontal positions of all channels (include those obtained from the
mathematical manipulation), the analytic resolution of which changes
with the time base.
SEC/DIV knob: it is used to set the horizontal scale factor for setting
the main time base or the window.
HORIZ MENU button: with this button pushed down, the screen shows
the operating menu (see Figure 29).
June 2017
Figure 28. Information about Vertical Position.
Figure 29. Time Base Mode Menu.
33
Page