The description of the Horizontal Menu is as follows:
Function Menu
Main (Main Time Base)
Set (Set Window)
Zoom (Zoom Window)
3.3.1
Main Time Base
Press the H1 menu selection button and choose Main. In this case, the
HORIZONTAL POSITION and SEC/DIV knobs are used to adjust the main
window. The display in the screen is shown as Figure 30.
34
Page
The setting of the horizontal main time
base is used to display the waveform.
A
window
cursors. This function is not available at
FFT mode.
The defined window area for display is
expanded to the full screen.
Figure 30. Main Time Base
Description
area
is
defined
by
two
June 2017