Table of Contents
Advertisement
9 BATTERY USING GUIDE
9.1
Charging the oscilloscope
Connect the power cord to a power source. Turn on the Power Switch Button
― o on the left side (make sure the "―" side is pressed down). Yellow light of
the indicator on the front panel means the battery is being charged. Once the
battery is full, the indicator will become green.
The lithium battery may not be fully charged when you receive it. Please charge
the battery for 12 hours before the first use. You battery can last 4 hours
depending on your usage after fully charged.
There will have battery power indication show on the top of panel when
oscilloscope power supplied by the battery.
,
,
and
power can only supply for 5 minutes maximum.
NOTE:
To avoid overheat of battery during charging, the ambient temperature is
not allowed to exceed the permissible value given in technical
specification.
June 2017
Figure 89. Battery level indicator.
indicates the level of your battery. When
Battery level indicator
include: , ,
and .
shows it means the
99
Page
Advertisement
Table of Contents
