Table of Contents
Advertisement
Alternate trigger (Trigger Type: Pulse) menu list:
Menu
Alternate
Mode
Source
Coupling
when
Mode
Holdoff
3.5
How to Operate the Function Menu
The function menu control zone includes 8 function menu buttons: Measure,
Acquire, Utility, Cursor, Autoscale, Save, Display, Help and 4 immediate-
execution buttons: Autoset, Run/Stop, Single, Copy.
46
Page
Settings
Pulse
Set vertical channel trigger type as pulse trigger.
CH1
Select CH1 as the trigger source.
CH2
Select CH2 as the trigger source.
AC
Not allow DC portion to pass.
DC
Allow all portion pass.
HF
Not allow high frequency of signal pass and only
low frequency portion pass.
LF
Not allow low frequency of signal pass and only
high frequency portion pass.
Polarity
Choose the polarity.
Select pulse width condition and turn the M knob to
set time.
Auto
Acquire waveform even no trigger occurred.
Holdoff
100ns~10s, adjust M knob to set time interval
before another trigger occur.
Reset
Set Holdoff time as 100ns.
Instruction
June 2017
Advertisement
Table of Contents
