Table of Contents
Advertisement
To turn the cymometer on or off:
Press the Display button.
In the Display menu, press the H4 button to toggle between the
cymometer display ON or OFF.
VGA Output (OD-620)
►
The VGA port could be connected to a computer monitor. The image of the
oscilloscope can be clearly displayed on the monitor.
To set the VGA Output:
Press the Display button.
In the Display menu, press the H5 button to toggle between ON or
OFF.
3.5.3
How to Save and Recall a Waveform
Press the Save button, you can save the waveforms, settings or screen images.
The menu displayed in the screen is shown as Figure 50.
The description of the Save Function Menu is shown as the following table:
Function Menu
Type
When the type is Wave, the menu shows as following:
Source
June 2017
Figure 50. Waveform Save Menu
Setting
Description
Wave
Choose
Setting
Record
Image
Record/Playback Waveforms")
Record
CH1
CH2
Choose the waveform to be saved.
Math
.
the
saving
type
type,
see
(about
the
"How
to
53
Page
Advertisement
Table of Contents
