Example 6: Video Signal Trigger - Promax OD-610 User Manual

Example 6: Video Signal Trigger

5.6
Observe the video circuit of a television, apply the video trigger and obtain the
stable video output signal display.
Video Field Trigger
►
For the trigger in the video field, carry out operations according to the
following steps:
Press the Trigger Menu button to display the trigger menu.
Press the H1 button to display the trigger type menu.
Press the F1 button to choose Single for Type.
Turn the M knob to choose Video as the mode.
Press the H2 button to display the Source menu.
Press the F1 button to choose CH1 for Source.
Press the H3 button to display the Modu menu.
Press the F1 button to choose NTSC for the modulation.
Press the H4 button to display the sync menu.
Press the F2 button to choose Field for Sync.
Turn the VOLTS/DIV, VERTICAL POSITION and SEC/DIV knobs to
obtain a proper waveform display (see Figure 88).
Figure 88. Waveform Captured from Video Field Trigger.
June 2017
91
Page