How To Record/Playback Waveforms - Promax OD-610 User Manual

3.5.4

How to Record/Playback Waveforms

Wave Record function can record the input current wave. You can set the interval
between recorded frames in the range of 1ms~1000s.The max frame number
reaches 1000,and you can get better analysis effect with playback and storage
function.
Wave Record contains four modes: OFF, Record, Playback and Storage.
Record: To record wave according to the interval until it reaches the end
►
frame set.
Record menu shows as follows:
Menu
Mode
Record mode
FrameSet
Refresh
Operate
NOTE: Both of the waveforms of Channel 1 and Channel 2 will be recorded. If a
Channel is turned off while recording, the waveform of the channel is
invalid in the playback mode.
June 2017
Setting
OFF Close wave record function.
Record Set record menu.
Playback Set playback menu.
Storage Set storage menu.
End frame Turn the M knob to select the number of frames to
record (1~1000).
Turn the M knob to select the interval between
Interval
recorded frames (1ms~1000s).
ON Refresh wave during recording.
OFF Stop refreshing.
Play Begin to record.
Stop Stop recording.
Figure 53. Wave Record.
Instruction
57
Page