User Interface Introduction - Promax OD-610 User Manual

Horizontal control area with 1 key and 2 knobs.
"HORIZONTAL POSITION" knob control trigger position, "SEC/DIV" control
time base, "HORIZ MENU" key refer to horizontal system setting menu.
Trigger control area with 3 keys and 1 knob.
"TRIG LEVEL" knob is to adjust trigger voltage. Other 3 keys refer to
trigger system setting.
2.2

User Interface Introduction

Waveform Display Area.
The state of trigger, including:
Auto:
Trig:
Ready: Pre-triggered data captured and ready for a trigger.
Scan:
Stop:
8
Page
Figure 6. Illustrative Drawing of Display Interfaces.
Automatic mode and acquire waveform without triggering.
Trigger detected and acquire waveform.
Capture and display the waveform continuously.
Data acquisition stopped.
June 2017