Table of Contents
Advertisement
3.5.9
How to Use Built-in Help
Press Help button, the catalog will display in the screen.
Press H1 or H2 to choose help topic, or just turn the M knob to
choose.
Press H3 to view the details about the topic, or just press the M knob.
Press H5 to exit the help, or just do other operations.
3.5.10
How to Use Executive Buttons
Executive Buttons include Autoset, Run/Stop, Single, Copy.
Autoset
►
It's a very useful and quick way to apply a set of pre-set functions to the
incoming signal, and display the best possible viewing waveform of the
signal and also works out some measurements for user as well.
The details of functions applied to the signal when using Autoset are shown
as the following table:
Function Items
Acquisition Mode
Vertical Coupling
Vertical Scale
Bandwidth
Horizontal Level
Horizontal Sale
Trigger Type
Trigger Source
Trigger Coupling
Trigger Slope
Trigger Level
Trigger Mode
Display Format
Run/Stop
►
Enable or disable sampling on input signals.
Notice: When there is no sampling at STOP state, the vertical division and
the horizontal time base of the waveform still can be adjusted within a
certain range, in other words, the signal can be expanded in the horizontal
or vertical direction.
When the horizontal time base is ≤50ms, the horizontal time base can be
expanded for 4 divisions downwards.
June 2017
Setting
Current
DC
Adjust to the proper division.
Full
Middle
Adjust to the proper division
Current
Show the minimum number of channels.
Current
Current
Mid-point Setting
Auto
YT
77
Page
Advertisement
Table of Contents
