How To Measure With Cursors; The Cursor Measurement For Normal Mode - Promax OD-610 User Manual

Rise Time: Time that the leading edge of the first pulse in the waveform
takes to rise from 10% to 90% of its amplitude.
Fall Time: Time that the falling edge of the first pulse in the waveform takes
to fall from 90% to 10% of its amplitude.
+Width: The width of the first positive pulse in 50% amplitude points.
-Width: The width of the first negative pulse in the 50% amplitude points.
Delay 12
Delay 12
+Duty: +Duty Cycle, defined as +D Width/Period.
-Duty: -Duty Cycle, defined as -D Width/Period.
3.5.7

How to Measure with Cursors

Press the Cursor button to display the cursor measurement function menu
(CURS MEAS) in the screen.
3.5.7.1

The Cursor Measurement for normal mode

The cursor
Measurement at normal mode, shown as Figure 68.
The description of the cursor measurement menu is shown as the following
table:
Function
Menu
Type
Source
70
Page
: The delay between the two channels at the rising edge.
: The delay between the two channels at the falling edge.
measurement includes
Figure 68. CURS MEAS Menu.
Setting Description
OFF Switch off the cursor measurement.
Voltage Display the voltage measurement cursor and
menu.
Time Display the time measurement cursor and
menu.
CH1 Display the channel generating the waveform to
which the cursor measurement will be applied.
CH2
Voltage Measurement and Time
June 2017