How To Set The Display System - Promax OD-610 User Manual

Figure 44. The displayed waveform after the noise is removed under the Average Mode,
3.5.2

How to Set the Display System

Press the Display button and the menu displayed in the screen is shown as
Figure 45.
The description of the Display Set Menu is shown as follows:
Function Menu
Type
Persist
XY Mode
Cymometer
VGA Disp
June 2017
in which the average number of 16 is set.
Figure 45. Display Set Menu.
Setting
Dots Only the sampling points are displayed.
Vect The space between the adjacent sampling
points in the display is filled with the vector
form.
OFF
1 second
Time 2 seconds Turn the M knob to set the persistence time.
5 seconds
Infinity
Clear Clear the persistence.
ON Turn on the XY display function;
OFF Turn off the XY display function.
ON Turn on the cymometer;
OFF Turn off the cymometer.
Connect the VGA port to a monitor. If set it
ON
as ON, the waveform could be displayed on
OFF
the computer monitor.
Description
49
Page