How To Measure Automatically - Promax OD-610 User Manual

3.5.6

How to Measure Automatically

Press the Measure button to display the menu for the settings of the Automatic
Measurements.
The oscilloscopes provide 20 parameters for auto measurement, including Vpp,
Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period,
Rise Time, Fall Time, Delay AB , Delay AB ,+Width, -Width, +Duty, -Duty.
That's 10 voltage and 10 time measurements in all.
The menu is displayed as next Figure.
The "Automatic Measurements" menu is described as the following table:
Function Menu
Add
Remove
66
Page
Figure 64. Measure Menu.
Setting
Type
CH1
Source
CH2
Show all
Add
Remove all
Type
Remove
Description
Press F1 ,show the measure types.
Select the source.
Show all the measures on the screen.
Add the selected
(shown at the left bottom, you could
only add 8 types at most).
Remove all the measures.
Turn M knob, select the types need to
be deleted.
Remove the chosen measure type.
measure types
June 2017