View Automatic Measurement - Promax OD-590 User Manual

USER'S MANUAL. OD-590/91/92

6.1.3 View automatic measurement

Operation
Measure
1. Two viewing modes are available: selected results on the menu and
full results on the main display.
2. To view the selected result, press the Measure key repeatedly until
the Result mode appears.
3. To view the full measurement result, press the Measure key again.
Select the channel from F1~F4 and press it. Oscilloscope runs all the
applicable Voltage and Time type measurements. The results are
shown on the display.
Page 69
Measurement
Result
Vpp
F 1
:
Vavf
F 2
:
Frequency
F 3
:
Dutycycle
F 4
:
RiseTime
F 5
:
View mode
F 1
CH1
F 2
CH2
CH3
F 3
(4CH only)
CH4
F 4
(4CH only)
F 5
OFF
01-2007