How To Measure Automatically - Promax OD-603 Manual

3.5.6

How to Measure Automatically

Press the Measure button to display the menu for the settings of the Automatic
Measurements.
The oscilloscopes provide 20 parameters for auto measurement, including PK-PK,
Max, Min, Vtop, Vbase, Vamp, Mean, Cycrms, OverShoot, PreShoot, Freq, Period,
Rise Time, Fall Time, Delay A→B , Delay A→B ,+D Width, -D Width, +Duty, -
Duty. That's 10 voltage and 10 time measurements in all.
The menu is displayed as next Figure.
The "Automatic Measurements" menu is described as the following table:
Function Menu
Add
Remove
62
Page
Figure 61. Measure Menu.
Setting
Type
CH1
Source
CH2
Show all
Add
Remove all
Type
Remove
Description
Press F1 ,show the measure types
Select the source
Show all the measures on the screen
Add the selected measure types
(shown at the left bottom, you could
only add 8 types at most)
Remove all the measures
Turn M knob, select the types need to
be deleted.
Remove the chosen measure type
June 2016