How To Save And Recall A Waveform - Promax OD-603 Manual

To turn the trig freq on or off:
Press the Display button.
In the Display menu, press the H4 button to toggle between the trig
freq display ON or OFF.
VGA Output (VGA port is optional)
►
The VGA port could be connected to a computer monitor. The image of the
oscilloscope can be clearly displayed on the monitor.
To set the VGA Output:
Press the Display button.
In the Display menu, press the H5 button to toggle between ON or
OFF.
3.5.3

How to Save and Recall a Waveform

Press the Save button, you can save the waveforms, settings or screen images.
The menu displayed in the screen is shown as Figure 47.
The description of the Save Function Menu is shown as the following table:
Function Menu
Type
When the type is Wave, the menu shows as following:
Source
June 2016
Figure 47. Waveform Save Menu
Setting Description
Wave
Choose
Setting
Record
Image Record/Playback
Cutwave setting is not in operation in this
Record
model)
Cutwave
CH1
Choose the waveform to be saved.
CH2
Math
.
the saving type
type, see
Waveforms";
(about the
"How to
the
49
Page