Main Time Base - Promax OD-603 Manual

The description of the Horizontal Menu is as follows:
Function Menu
Main (Main Time Base)
Set (Set Window)
Zoom (Zoom Window)
3.3.1

Main Time Base

Press the H1 menu selection button and choose Main. In this case, the
HORIZONTAL POSITION and SEC/DIV knobs are used to adjust the main
window. The display in the screen is shown as Figure 27.
30
Page
The setting of the horizontal main time
base is used to display the waveform.
A window area is defined by two
cursors. This function is not available at
FFT mode.
The defined window area for display is
expanded to the full screen.
Figure 27. Main Time Base
Description
June 2016